Mechanical Engineering Department is one of the oldest and biggest departments of the Institute which was established in the year 2002 with an intake of 60 students and now we were approvedfor an intake of 180 students. The Department has the total student strength of 700+ which is committed to well being and all-round development of its students and make efforts to continuously enhance teaching-learning environment through using best practices and innovations in pedagogy.

Objective of the undergraduate programme is to prepare the manpower to meet the global needs and to take up their career in a broad spectrum of Industries. Most of the students, who graduate from the department, end up taking leading positions in industry, academia, government and commercial organization in both India and Abroad.

The Department has the faculty strength of 33 whom are highly regarded and technical staff of 6 who are associated with 13well equipped Laboratories. Our faculties are specialized in all major areas of Mechanical Engineering and continually evolved to incorporate advancements in trending fields like Mechatronics, Nanotechnology, Bio Fuels, Nano Fluids, 3D Printing and Robotics.

The Department introduced Post graduate programme in Mechatronics in the year 2012, we achieved 2 gold medals in the academic year 2013-2014. Postgraduate students are actively engaging in research work and improving significantly through participating in various National and International Conferences and published papers in reputed journals.

The Department conducts International Conference ICONSTEM – in trending and emerging concepts every year to share their knowledge and research with other researchers from reputed universities and industry experts all around the world.

The Department also conduct student level National Technical Symposium to enhance the student’s technical skills and to update their knowledge in modern developments in engineering and technology.

The Department has various chapters and associations like Society of Automotive Engineers – SAE India Southern Section and Indian Society of Heating Refrigeration and Air Conditioning Engineers (ISHRAE – Kalpakkam Chapter) which provide ample of growth for every individual student and it promotes collaborative practices too.

SAE Collegiate Club of Jeppiaar Engineering College was inaugurated in the year 2006 with strength of 25 student members. At present the club has strength of 150 student members. SAE student members actively participate in SAE events like SUPRA SAE, BAJA SAE, EFFI-CYCLE, TRACTOR Design Competition and ISNEE events like Go-Kart, Quad-Bike and Formula Green. SAE also provide opportunities like Industrial Visit, Guest Lecturers, Trek, SAE COLT, student executive council meeting and Newsletter.

Indian Society of Heating Refrigeration and Air Conditioning Engineers, Kalpakkam Chapter was inaugurated in the year 2016 with strength of 50 student members. ISHRAE provide opportunities like Industrial Visit in Indira Gandhi Centre for Atomic Research (IGCAR) at Kalpakkam, Guest Lecturers from field experts, Internship for student members to excel their knowledge and Job Junctions.

Programmes offered by the Department are:

  • B.E. MECHANICAL ENGINEERING [4 – YEARS]
  • M.E. MECHATRONICS [2 -YEARS]

VISION

To create excellent professionals in the field of Mechanical Engineering and to uplift the quality of technical education on par with the International Standards.

MISSION

M1: To reinforce the fundamentals of Science and Mathematics to Mechanical Engineering and

critically and relatively investigate complex mechanical systems and processes.

M2: To engage in the production, expansion and practice of advanced engineering applications

through knowledge sharing activities by interacting with global communities and industries.

M3: To equip students with engineering ethics, professional roles, corporate social responsibility

and life skills and apply them for the betterment of society.

M4: To promote higher studies and lifelong learning and entrepreneurial skills and develop

excellent professionals for empowering nation’s economy.

Program Outcomes(POs):

PO1Engineering Knowledge: Apply the knowledge of mathematics, science, engineering fundamentals and an engineering specialization to the solution of complex engineering problems
PO2Problem analysis: Identify, formulate, review research literature and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences.
PO3Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety and the cultural societal and environmental considerations.
PO4Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data and synthesis of the information to provide valid conclusions.
PO5Modern tool usage: Create, select and apply appropriate techniques, resources and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.
PO6The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
PO7Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts and demonstrate the knowledge of and need for sustainable development.
PO8Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
PO9Individual and team work: Function effectively as an individual and as a member or leader in diverse teams and in multidisciplinary settings.
PO10Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations and give and receive clear instructions.
PO11Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
PO12Life-long learning: Recognize the need for and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

List of PSO:

PSO1Understand the basic concept of various mechanical engineering field such as design, manufacturing, thermal and industrial engineering.
PSO2Apply the knowledge in advanced mechanical system and processes by using design and analysis techniques
PSO3Develop student’s professional skills to meet the industry requirements and entrepreneurial skills for improving nation’s economy stronger

Program Educational Objectives (PEOs)

PEO1To enrich the technical knowledge of design, manufacturing and management of Mechanical systems and develop creative and analytical thinking in research.
PEO2To relate, strengthen and develop the theoretical knowledge of the Mechanical Engineering by exhibiting various concepts applied through diverse industrial exposures and experts’ guidance.
PEO3Facilitate the students to communicate effectively on complex social, professional and engineering activities with strict adherence to ethical principles.
PEO4Create awareness for independent and lifelong learning and develop the ability to keep abreast of modern trends and adopt them for personal technological growth of the Nation.

Click the below link to download the regulation.

Curiculam R-2013

Curriculam R-2017

LAB FACILITIES

THERMAL ENGINEERING LAB

FLUID MECHANICS AND MACHINERY LAB

METROLOGY AND MEASUREMENTS LAB

        

        

ENGINEERING PRACTICE LAB

         

MECHATRONICS LAB

         

         

CAD / CAM LAB

         

Co-curricular

LIST OF TRAINING ACTIVITIES (2017-18)

EXTRA-CURRICULAR ACTIVITIES:

The following are extra-curricular activities/Clubs:

  • Jeppiaar Sports Academy
  • Cultural Events – Pratiyog

JEPPIAAR SPORTS ACADEMY

Sports Facilities Available The College Campus
S.No Play Field Available No Of Field Area Available
1 400 M Track 1 Standard Track
2 Football Field 1 Standard Field
3 Volleyball Courts 3 L=40,W=20m
4 Basketball Courts 2 L=40,W=20m
5 Handball Courts 1 L=40,W=20m
6 Throwball 1 L=40,W=20m
7 Ball Badmintion 1 L=40,W=20m
8 Kho-Kho 1 L=40,W=20m
9 Kabaddi Courts 2 L=40,W=20m
10 Indoor Games
Chess
Carom
Table Tennis
Gymnasium
Indoor Games
Available Available

NATIONAL SERVICE SCHEME (N.S.S)

National Service Scheme (NSS) is a permanent youth programme under the ministry of    Youth Affairs and Sports, Government of India and funded by Government of Tamil Nadu and Government of India in the ratio of 5:7 .

National Service Scheme Jeppiaar Engineering College was initiated with a vision, to cause benefit to the society in any possible way. We at NSS function with a mission to mobilise our youth into a sect of progressive citizens and imbibe in them an inclination towards social service. NSS Jeppiaar has 200 students, from all respective years and batches, who help contribute to the cause of the scheme.

Activities Conducted in the YEAR – 2017-18

  • Hand wash awareness (Schools   in Chennai)
  • Car free Sunday
  • (Marina Beach, Chennai)
  • Barath Yatra- Awarness Campaign by Noble Prize Laurate Shri. Khailash Sathyarthi
  • (Rajarathinam Stadium, Chennai Jeppiaar Engineering College)
  • Plantation (Kodambakam)
  • Awarness program on Save Turtle (Jeppiaar Engineering College)
  • Swatch Bharath Campaign (CSI Deaf and Dum School Santhome Chennai)
  • Sand Sculpting Contest (Palavakkam Beach)
  • Ridley Run (Palavakkam Beach)
  • Special camp 2018 (Manampathy Village, Thiruporur
  • Kan chipuram)
  • We the volunteer (AnnaUniversity)
  • Plantation drive with Mahindra first choice (Jeppiaar Engineering College)
  • Blood Donation Drive (Jeppiaar Engineering College)
  • Plantation with School Children (Jeppiaar Engineering College)
  • Walkathon(9kms)
  • (Jeppiaar Engineering College- Jeppiaar school)
  • Womens Day  (Jeppiaar Engineering College)
  • 270 SAPLINGS PLANTED

NATIONAL CADET CORPS (N.C.C)

National cadet corps (N.C.C) Naval Wing was started in our college on 17th September 2003 in the presence of Commander B.V.Ramakrishna and is functioning successfully under the excellent guidance of our Founder Chairman Colonel Dr.Jeppiaar M.A, B.L, Ph.D. and energetic Director Dr.RegeenaJeppiaar B.Tech.,M.B.A.,Ph.D.

The strength of NCC division is 50 cadets, including 36 % Girl Cadets. Every year 20 Parades are conducted, each parade consisting of 6 periods (i.e.) 4 hours. Petty officers from 4(T.N) Naval Tech Unit train and infuse great enthusiasm in our cadets.

Name of the Activities

  • Kargil Vijay Diwas
  • Kargil Day Blood Donation Camp
  • Independence Day Celebration
  • Naval Technical Attachment Camp
  • Rally For Rivers
  • International Coastal Clean Up Day
  • Tsunami Alert Skit
  • Swachh Bharat
  • Annual Training Camp
  • Republic Day Celebrations
  • Blood Donation Camp
  • NCC Day celebration
  • DGNCC NEW DELHI Commendation Award

YOUTH RED CROSS

The Youth Red Cross Unit was inaugurated in our college on 5th September 2003 and registered under the Red Cross Society, Tamil Nadu Branch.

As we know, Youth Red Cross society is a very important group movement for students in institutions of Higher education to bring out their voluntary service minds for people in distress. We thank our Honourable Chairman Colonel Dr.Jeppiaar., M.A.B.L., Ph.D., and Managing Director Dr.Regeena.Jeppiaar, B.Tech. M.B.A., Ph.D. in helping us to do these activities.

The first activity organized was the collection of an important commodity- BLOOD. The Youth Red Cross Unit of our college organizes a “Blood Donation Camp” on twice a year. A total of minimum 200 students and staffs actively participate and donate blood. We are proud to say that our YRC Unit received “DR.SIVARAJ ROLLING TROPHY” for 8 times consecutively for maximum blood donated Engineering College in Tamilnadu. We are proud to say that we received from His Excellency Dr.Surjit Singh Burnala, Governor of Tamilnadu State twice on the Red Cross Day 2010 &2011 and the year 2012 from Hon’bleMr.Duraisamy, Mayor of Chennai for being the maximum blood donated college in Tamil Nadu. During the year 2013 we received Trophy from Dr.Rosaiya, Governor of Tamilnadu. Twice we received trophy from “Dr.MGR Medical University” for helping them by donating blood during crucial situations like Flood and Dengue periods.

Achievements

  • Lecturer In First Aid & Medallion Certificate Holder7 Times “Dr.Sivaraj Rolling Trophy” 4 Times “Dr.Sivaraj Rolling Trophy
  • Kargil Day Blood Donation Camp
  • Blood Donation Camp

JEPPIAAR ROTARACT CLUB ACTIVITIES

  • Eye check up, general check up was done for drivers of Jeppiaar Engineering college
  • Students were taught about the importance of yoga.
  • Smoking level were monitored and medicines were given to drivers at Jeppiaar engineering college.
  • Students  were taught to how to hold pens and how to improve their handwriting, how to carry their school bag at government school manamathy village.
  • Volunteered for blood donation camp at Jeppiaar engineering college
  • Management sponsored 750 lunch .Orphanage students were taken to vandaloor zoo.
  • Students participated in cultural activities at ethiraj college and volunteered for the event.
  • From brahma kumaris yoga trainers taught yoga asanas to students.
  • Volunteered in smile Chennai were school children were taught how to brush their teeth and importance of brushing.
  • Dr. Harish explained the postures to reduce back pain.
  • Students participated in competitions to celebrate  Dr. Abdul kalam birthday celebration at Jeppiaar Engineering college. Winners was awared with certificates.
  • Rotract students visited New Hope orphanage and distributed sweets to children.
  • Around 10 Rotractors participated in chess tournament.
  • Around 50 students participated in 5 km run at Regreen Marathon.
  • 5 Rotractors participated in this Christmas celebration.
  • Rotractors volunteered this medical camp.
  • 32 rotaractors participated and conducted games for school children.
  • 32 rotaractors participated in 5.3 Km from Madhya Kailash – Guru Nanak College
  • Around 20 students participated in Fusion.
  • Around 15 rotaractors participated in celebration at Manamathy village.
  • 1 faculty coordinator participated in EPIC conference
  • 30 rotractors participated in sand sculpting contest.
  • Around 100 rotractors participated in this session.
  • To eradicate and educate the youth about drug abuse, this session was organized at Jeppiaar Engineering College.
  • To  create awareness about the scarcity of water and to use right amount of water required in their day-to day use.
  • To ensure women are healthy, exclusive women medical camp was organized on women’s day with the scope of dental, eye, general check up at Manamathy village.
  • To train leadership skills and communication skills RYLA was organized at Jeppiaar Engineering College.

TAMIL THIRUVIZHA

An ethnic event of Tamizh peravai has been conducted during 12th and 13th March 2018 in our college. Native games and sports have been organized by our department students and they were praised with tamizh books.

2017-18 JOURNAL PUBLICATION AND CONFERENCE DETAILS

DETAILS OF INTERNATIONAL PUBLICATION

Damodharan, D., Sathiyagnanam, A. P., Rana, D., Rajesh Kumar, B., &Saravanan, S. (2018)’Combined influence of injection timing and EGR on combustion, performance and emissions of DI diesel engine fueled with neat waste plastic oil’ reviewers reports have been received from Energy Conversion and management Vol. 161, pp. 294–305. Impact Factor: 5.589.

Damodharan, D., Sathiyagnanam, A. P., Rajesh Kumar, B., Ganesh K.C., Cleaner emissions from a DI diesel engine fueled with waste plastic oil derived from municipal solid waste under the influence of n-pentanol addition, cold EGR and injection timing. Accepted and article in press Environmental Science and Pollution Research (Springer).Impact Factor: 2.784

K.Gopal., Sathiyagnanam, A. P., Rajesh Kumar, B., Saravanan, S., Rana, D., B.Sethuramasamyraja., “Prediction of emissions and performance of a diesel engine fuelled with n-octanol/diesel blends using response surface methodology” Impact Factor 5.715

Jagatheesan.K. Design and analysis of dynamic characteristics in marine hubless screw Propellers, 2018  DOI:16.10089  page no; 715-725.

Jegandhas. p, divine sharon.m,giritharan.s,gnana vel.s,vigneshwaran s.v. Two wheeer for upper limp disability2018  DOI:16.10089  page no; 737-742.

Dr.L.Ranganathan. Heat transfer enhancement using nanofluids in automobile radiator2018  DOI:16.10089  page no; 771-776.

Balakalanithi, Raj Vishaal, Raghavan.P, Rajesh.R, Sachin Michael. Design of floor and glass wall-cleaning robot2018  DOI:16.10089  page no; 1380-1384.

Broster.M, Ramadoss J. Analysis of stress distribution in trans-femoral prosthetic socket 2018 DOI:16.10089  page no; 1373-1379.

Ramadoss J, Broster.M. study of tensile, compressive an impact properties with and without  fibre orientation for epoxy glass  fibre and carbon fibre composites 2018  DOI:16.10089  page no; 1425-1429

Ealumalai.A, Sridhar.R, Gugainamasivayam.S, Natarajan.V,Ranganathan.L A novel method for detecting misfiring in two wheeler to comply with bs-vi emission standards2018  DOI:16.10089  page no; 675-680

Dr.D.Madhesh. Thermal  analysis of casting solidification process using numerical method2018  DOI:16.10089  page no; 1398-1401.

Uthara. R, madhumathi. A, suvalakshmi. T. M, dr. L. Ranganathan. Design and analysis of double bellow expansion joint2018  DOI:16.10089  page no; 952-955.

G.devaraj. Influence of friction stir welding process parameters on aa1100-aa2024t351 alloy using optimal design matrix2018  DOI:16.10089  page no; 1351-1355.

Dr.d.madhesh. Thermal  analysis of casting solidification process using numerical method 2018  DOI:16.10089  page no; 1398-1401.

M.Senthil Kumar., K.Arul., N.Sasikumar.,”Oxygen enrichment on the engine performance, emission and combustion behaviour of a biofuel based reactivity controlled compression ignition engine.”

DETAILS OF INTERNATIONAL CONFERENCE

Dr. D. Madhesh. Thermal Analysis Of Casting Solidification Process Using Numerical Method, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Sudhakar.j. Evaluvation of mechanical properties of jute/sisal Reinforced hybrid composite laminates using epoxy Resin, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Jagatheesan.K. Design and Analysis of Dynamic Characteristics in Marine Hubless Screw Propellers, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

E.Jeeva, Balaguru.R, J.Dilip Singh. Green Biosynthesis of Silver Nanoparticles Coated Bacterial Cellulose Nano Fiber Using Plant Extract for Slow –Released Antimicrobial & Antibacterial Wound Dressing, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Velmurugan G. Mechanical Properties of Hemp and Glass Fibre Based Hybrid Composites under Alkaline Environment, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

J.Paul Chandra Kumar, Rajesh Kumar N,S.Dhinakaran. Analysis of Heat Generation between automobile tyre and road surface during braking using Abaqus software, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Melvin Victor Depoures. Effect of cadmium ferrite nano particle additive On performance combustion and emission Characteristics of single cylinder diesel engine Fueled with karanja/diesel blend, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

K. Gopal. Investigation of Aluminium Oxide and Zinc Oxide Nanoparticle Fuel Additives to Biodiesel for Improvement of the Performance and Exhaust Emission in a CI Engine, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

M.Broster. Analysis of thermal distribution in above knee prosthetic socket, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

M.Ayyandurai. Experimental studies on machining  copper  materials by using abrasive water jet machining and laser beam machining, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

S Dhinakaran. Effect of Weight Percentage on Mechanical Properties of Aluminium Matrix Composites, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

J.dilipsingh. Automatic wheel assembly using plc, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

P.Chellapandi. Experimental Investigations On Mechanical, Micro-Structural And Tribological Behavior Of B4c, Sic And Mg Reinforced Aluminum Metal Matrix Composites, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Ramadoss.J. Study Of Tensile, Compressive An Impact Properties With And Without  Fibre Orientation For Epoxy Glass  Fibre And Carbon Fibre Composites, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

D.Damodharan. Effect of higher alcohols addition onperformance And emission characteristicson single cylinderDiesel engine by usingdiesel/waste plastic oil Blends, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Dr. D. Madhesh. Thermal Analysis Of Casting Solidification Process Using Numerical Method, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Balakalanithi. Optimization of minimum quantity lubrication Using surface grinding, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Microprocessors in Robotic and Manufacturing Systems Cooling Using Vapor Compression Refrigeration, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Rajesh Kumar, J.Paul Chandrakumar, S.Dhinakaran. Fabrication of AL2014 andSiC cast composite by stir casting technology, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

L.ranganathan. Heat transfer enhancement using nanofluids in Automobile radiator, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

G. Devaraj. Influence of Friction Stir Welding Process Parameters on AA1100-AA2024T351 Alloy using Optimal Design Matrix, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

Jagatheesan.K. Design and analysis of dynamic characteristics in marine hubless screw propellers, 2018  DOI:16.10089  page no; 715-725

L.Ranganathan. Heat transfer enhancement using nanofluids in automobile radiator2018  DOI:16.10089  page no; 771-776.

Jagadeesan Ga. Wilson Sahayarajb and Gangaru Baskarc methyl-1,1′,2,2′,3′,6′,11′,11’b-octahydrospiro[indole-3,5′naphtha[2,3-a] pyrrolizine]-2,6′,11′-trione, Fourth International Conference  On Science, Engineering And Technology, Role of Robotics Engineering in Science and Technology, 2018.

GUEST LECTURES CONDUCTED 2017-2018

S. No. Gap Date-Month-Year Resource Person with Designation
1 Basic and practical knowledge in engine mechanism 24.03.2018 P.XavierJaganathan, Chief Executive Officer, Goodwin Motors.
2 Advanced  computational techniques in fluid mechanics 18.07.2017 1.Smrutimaya Pattanak and 2.R.Luxmi Narasimman, CAE  Analyst, Udvavisk Technologies Pvt.ltd.
3 Non-Destructive Testing (NDT) 07.01.2018 E.Vignesh, Adithya Printers.
4 Recent trends in Refrigeration system 24.03.2018 P.XavierJaganathan, Chief Executive Officer, Goodwin Motors.
5 Technical and tool modeling using CATIA 03.08.2017 Augustin, Trainer, SPACE CADD.
6 CAD modeling 06.09.2017 CADD Centre.
7 Current trends in Automobiles 24.03.2018 P.XavierJaganathan, Chief Executive Officer, Goodwin Motors.
8 Advanced Manufacturing Processes – 3D Printers 20.02.2018 E.Vignesh, Adithya Printers.
9 Human Resources Management process 08.03.2018 Mr.P.WilfredSoundaram.The Supreme Industries Limited,
10 Sensors and transducers in automotive 09.08.2017 NSIC – Govt.of India
11 Recent trends in Robotics 22.09.2017 M.Siranjeevi, Assistant Professor, JEC.

SEMINAR, WORKSHOP ORGANIZED 2017-2018

SL.NO EVENTS COURSE DATE TOTAL STRENGTH ORGANISATION
1 Workshop sensor & transducer in automotive 08-09-2017 61 NSIC – GOVT.OF INDIA
2 Seminar ndt 01-07-2017 80 ADITHYA PRINTERS
3 Workshop current trends in automobiles 24-03-2018 134 GOODWIN MOTORS PVT LTD
4 Hands on Training recent trends in refrigeration system 24-03-2018 22 GOODWIN MOTORS PVT LTD
5 Workshop recent trends in robotics 24-03-2018 33 M.SIRANJEEVI, ASSISTANT PROFESSOR, JEC
6 Seminar recent advancement of 3d printing 20-02-2018 183 E.VIGNESH, ADITHYA PRINTERS

AWARDS RECEIVED

UNDER GRADUATE

BATCH NAME PERCENTAGE RANK
2002-2006 MOHAMMED IBRAHIM BADUSHA 88.37 9
ARAVIND V 86.29 31
2003-2007 SAKET AGARWAL 88.11 49
ARUN V 90 10
2004-2008 AKSHAY S JAIN 88 31
SAM RABENDRAN JEBA SINGH S 87 44
2005-2009 UDAYASANKAR V.K 87.4 24
2006-2010 SRIKRISHNA A.S 87.4 28
SRIKAMTH 86.14 47
2007-2011 DORAIKANNAH D 85.22 48
2008-2012 JAYACHANDRAN S 9.11 6
INBASEKARAN A 8.9 21
ARUNKUMAR A 8.78 33
CHIDAMBARATHANU M 8.78 33
BHARATH B 8.73 37
SURAJ SANKAR T.S 8.71 39
SOUNDARAJAN T 8.64 46
KUMARESAN S 8.62 48
KARTHICK B 8.59 50
2009-2013 GIRIJA V 8.75 33
VIVIN THOMAS ISSAC 8.73 35
2010-2014 BALAJI T 9.38 1 (GOLD)
MUKUNTHAN M 8.8 36
2011-2015 ATHIRA S 9.09 16
ARUL SELVAN R.V 8.81 41
RAJAGOPAL D 8.72 50
2012-2016 MURALIRAJ K 9.12 15
NITHISH PRASAD K 9.08 19
SATHISH KUMAR A 8.96 31
2013-2017 SHANMUGAM C 8.98 21
SUNDARAPANDIAN D 8.72 47

POST GRADUATE

2012-2014 GAYATHRI R 8.9 1
BALAKALANITHI 8.9 1
2015-2017 GAYATHRI K 8.99 1

SAE 2017-18

Factory Visit

31st January 2018 at Caparo Engineering India Pvt Ltd, Sriperumbudur, Tamil Nadu.

1.Ajeeth Kumar  II  year Mech
SAE Membership Number: 7170449744
2.Jagadeesh Rahul  2nd year Mech
SAE Membership Number: 7170449745
3.Praveen Balaji.S  3rd year Mech
SAE Membership Number: 7170449757

NATIONAL GO-KART CHAMPIONSHIP 2017

A team of 25 students from Mechanical Engineering have registered and participated in virtual event and selected for final event to be held on Feb 12th to 16th 2018 at KARI Motors Speedway, Coimbatore.

  • TEAMXLR8 Secured an overall rank of 13 at the final round, 3rd in Tamil Nadu and 1st in Chennai division.
  • Our Chairman & Managing Director Dr.M.Regeena Jeppiaar sponsored Rs 1 lakhs to TEAMXLR8 Go-kart team.
  • Our Chairman & Managing Director Dr.M.Regeena Jeppiaar awarded cash prize of Rs.30000/- to TEAMXLR8 Go-kart team.

TRACTOR DESIGN COMPETITION (TDC)

  • A team of 25 students registered for TRACTOR DESIGN COMPETITION (TDC) organized by SAEISS.
  • The final event is to be held on 21st -23rd June 2018, Chennai.
  • Our Chairman & Managing Director Dr.M.Regeena Jeppiaar sponsored Rs 2 lakhs to TDC team.

 

ACADEMIC YEAR 2016-17

# Mr.Murali Raj was awarded “Student Section Award” by SAEISS

SAE TIER-1 Student Convention

No. of students participated: 200

Venue: Jeppiaar Engineering College

Date: September 2015

SAE TIER-2 Student Convention

No. of students participated: 32

Venue: KCG College of Technology

SAE TIER-3 Student Convention

No. of students participated: 5

Venue: Kongu College of Engineering, Perundurai, Erode.

 

  • K.GOKULIV year Mechanical Engineering was elected as “Student Executive Council Member (SEC)” from SAEINDIA Southern Section for the year 2016-2017.

 

SUPRASAEINDIA 2016

  • A team of 25 students from mechanical engineering have registered and participated in virtual event and selected for the final event.
  • The final event was held on 4th to 9th July 2016 at Buddh International Circuit, Greater Noida.

SAE-EFFICYCLE 2015-2016

A Team of 10 students from Mechanical Engineering participated in SAE-EFFICYCLE virtual event on 18thjuly 2015 held at Rajalakshmi Institute of Technology, Chennai.

SAE-EFFICAR 2015-2016

A Team of 10 students from Mechanical Engineering participated in SAE-EFFICAR virtual event on 22-24th January 2016 held at Panjab University, Chandigarh.

NATIONAL GO-KART CHAMPIONSHIP 2015-UNSTOPPABLES V2.0

A team of 25 students from Mechanical Engineering have registered and participated in virtual event selected for final event.

The final event was held on February 12th to 15th 2016 Kari Motor Speedway, Coimbatore.

TIER-1 EVENTS SEPTEMBER 2015

AERO MODELLING

AUTO QUIZ

MANUFACTURING TECHNOLOGY

TECHNICAL PAPER PRESENTATION

Contact Details

Dr. V. NATARAJAN, Ph.D.
Professor & Head,
Department of Mechanical Engineering,
Jeppiaar Engineering College,
Rajiv Gandhi Salai, Jeppiaar Nagar, Semmancherry- 600 119

Phone
044- 2450 2818
Extn : 138

Email
mech@jeppiaarcollege.org

LEARN FROM
WORLD-CLASS
EXPERTS

& UNLEASH YOUR POTENTIAL TO BREAK NEW GROUND

Send Enquiry

Your details will not be published.
Required fields are marked.